Definitions

Default Model Parameters

Circuit

Property	Definition
Conductor Type	Specify the default conductor material for all circuits. The default is copper (Cu.).
Conduit Type	Specify the default conduit type of all circuits. The default is RMC (Rigid Metal Conduit), with options for EMT, PVC (Sch. 40), PVC (Sch. 80), and LFMC.
Manual Added Length	Manual Added Length is supplemental to Calc. Length. The Net Length of a circuit is the sum of the Calc. Length and the Manual Added Length.
Neutrals Per	Specify the default number of neutrals per circuit. The default number is one.
Grounds Per	Specify the default number of grounds per circuit. The default number is one.
Non-linear	A boolean property representing non-linear loads. A non-linear load changes impedance with applied voltage. This means the load will not be sinusoidal, and cause harmonics.

MV Circuit

Property	Definition
Temperature	Specify the default temperature rating for all medium voltage circuits. The default is MV-90.
Conductor Assembly	Specify the conductor assembly of the medium voltage circuit. The default is single conductor.

Mechanical

Property	Definition
VFD	A boolean property which represents if a Mechanical Equipment has a VFD (variable frequency drive).

Distribution Board

Property	Definition
Qty Breakers	Specify the quantity of breakers for each Distribution Board. By default, each Distribution Board has space for ten breakers.
Neutral Bus	Specify if a Distribution Board has a neutral bus. By default, each Distribution Board has a neutral bus.
Ground Bus	Specify if a Distribution Board has a ground bus. By default, each Distribution Board has a ground bus.
200% Neutral	Specify if a Distribution Board has a 200% neutral bus.
Iso. Ground Bus	Specify if a Distribution Board has an isolated ground bus.
Enclosure Type	Specify the type of enclosure.
Voltmeter	By default, each Distribution board has a Voltmeter.
SPD	By default, each Distribution board has a surge protective device (SPD).
Power Meter	By default, each Distribution board has a Power Meter.

Bus Duct

Property	Definition
Qty Breakers	Specify the quantity of breakers for each Bus Duct. By default, each Bus Duct has space for ten breakers.
Neutral Bus	Specify if a Bus Duct has a neutral bus. By default, each Distribution Board has a neutral bus.
Ground Bus	Specify if a Bus Duct has a ground bus. By default, each Bus Duct has a ground bus.
200% Neutral	Specify if a Bus Duct has a 200% neutral bus.
Iso. Ground Bus	Specify if a Bus Duct has an isolated ground bus.
Top-Fed	Specify if a Bus Duct is constructed via top fed installation.

XFMR

Property	Definition
Overload Rating	A tranformer can be overloaded and still operate under certain conditions. By default, the overload rating for each transformer is one.
% Impedance	The percent impedance is a measure of the volts dropped when a transformer operates under full load due to winding resistance and leakage reactance expressed as a percentage of the rated voltage.
Ground Bus	Specify if a transformer has a ground bus. By default, each Bus Duct has a ground bus.
Conductor Type	Specify the conductor type for each transformer. The default material is copper (Cu.).
XFMR Type	The default transformer type is dry type. Other options include Cast Coil, VPI, and Liquid.
K Rating	The K rating of a transformer weighs the effects of harmonic load currents according to their effects on transformer heating. A K rating of 1.0 indicates a linear load. The higher the K rating, the greater the harmonic heating effects.
Primary Winding	Specify the primary winding configuration to be Delta or Wye.
Sec. Winding	Specify the primary winding configuration to be Delta or Wye.
Primary BIL	An electrical system is subject to lightning impulses or overvoltage conditions. Energy is discharged through surge protective devices before equipment become damaged. The BIL (basic impulse level) affects the amount of insulation which protects the transformer from being damaged by surge voltages.
Secondary BIL	Specify the BIL rating of the secondary winding.
Ground Type	Specify the ground type of a transformer to be solid, low impedance, or high impedance.
Insulation Rating	Specify the rating of the insulation system of the transformer. The insulation rating is the maximum interal operating temperature before it begins to fail.
Temp. Rise	The temperature rise of a transformer is defined as the average temperature rise above the ambient temperature due to operating conditions under its nameplate load rating.
Surge Arrestor	Specify if a transformer has a surge arrestor.
Elect. Shield	Specify if a transformer has an electrostatic shield.
Snubber	Specify if a transformer has a snubber, which is used to suppress voltage transients.

Panelboard

Property	Definition
Qty Poles	Specify the number of pole positions for each Panelboard
Main Breaker	Specify if each Panelboard will have a main breaker
Bolt-On Breaker	Specify if each Panelboard will have a bolt on breaker
Neutral Bus	Specify if each Panelboard will have a neutral bus.
Ground Bus	Specify if each Panelboard will have a ground bus.
200% Neutral	Specify if a Distribution Board has a 200% neutral bus.
Iso. Ground Bus	Specify if a Distribution Board has an isolated ground bus.
Enclosure Type	Specify the type of enclosure.
Conductor Type	Specify the default conductor material for all Panelboards. The default is copper (Cu.).
Door-in-Door	By default, each Panelboard has a Door-in-Door construction.
Feed-Through	Specify if a Panelboard is a feed-through panel.
Stainless Steel	Specify if a Panelboard is a stainless steel construction.
Flush-Mount	Specify if a Panelboard is flush mounted.
Split Bus Meter	Specify if a Panelboard has a split bus meter.
Branch Ckt. Meter	Specify if a Panelboard has a branch circuit meter.

ATS

Property	Definition
Enclosure Type	Specify the type of enclosure.
Transition	Specify if an ATS is open or closed transition. Open transition uses the break-before-make principle. Closed transition uses the make-before-break principle.
Neutral Contruction	Specify if the neutral construction of an ATS is solid, switched, or overlapping.
Bypass Isolation	Specify if an ATS is bypass isolation. Bypass isolation allows the ability to perform maintenance, while still serving the load.
Neutral Bus	Specify if an ATS has a neutral bus. By default, each ATS has a neutral bus.
Ground Bus	Specify if an ATS has a ground bus. By default, each ATS has a ground bus.
Static	Specify if an ATS is a STS (static transfer switch). Static transfer switches allow for instantaneous transfer of power between sources.

Utility

Property	Definition
Voltage Distortion	A tranformer can be overloaded and still operate under certain conditions. By default, the overload rating for each transformer is one.

Generator

Property	Definition
Subtransient Reactance	The percent impedance is a measure of the volts dropped when a transformer operates under full load due to winding resistance and leakage reactance expressed as a percentage of the rated voltage.

Calculation Settings

Property Name	Definition
XFMR OCP Multiplier	Multiplier is a factor which is multiplied by the Load Capacity of a transformer to size its protective device.
Mech. OCP Multiplier	Multiplier is a factor which is multiplied by the Load Capacity of a Mechanical Equipment to size its protective device.
Fire Pump OCP Multiplier	Multiplier is a factor which is multiplied by the Load Capacity of a Fire Pump to size its protective device.
Temp Rating Threshold 60/75 C: (Amps)	Specify the amperage which is the limiting factor between switching from the 60 degrees celsius column to the 75 degrees celsius column (NEC 310.16).

Flag Settings Definitions

Property	Definition
Normal Priority Voltage Drop Threshold	A Flag is raised when the VD% Net for a piece of distribution equipment exceeds a Specifies percentage. The default value is 2%. The default threshold for end-of-line Equipment is 5%.
Non-Normal Priorty Voltage Drop Threshold	A Flag is raised when the VD% Net for a piece of non-normal distribution equipment, such as a generator or other secondary source of power, exceeds a Specifies percentage. The default value is 2%. The default threshold for end-of-line equipment is 5%.
Name	A Flag is raised when a piece of Equipment does not have a name.
Breaker Undersized	A Flag is raised when a breaker’s trip setting is smaller than its frame size.
Frame Undersized	A Flag is raised when an OCPD’s frame size will not accommodate the associated Load Capacity.
kAIC Undersized	A Flag is raised when the kAIC rating of an Equipment will not accommodate the SCC Net value.
Sets Per	A Flag is raised when the current amount of sets of conductors per circuit will not accommodate the Load Capacity.
Phase Undersized	A Flag is raised when the phase size of a conductor will not accommodate the Load Capacity.
Ground Undersized	A Flag is raised when a the size of the ground conductor will not accommodate the Load Capacity.
Conduit Undersized	A Flag is raised when the amount of the cross-sectional area that is occupied by a cable or cables exceeds the maximum fill ratio.
Voltage Drop Error	A Flag is raised when the VD% Net maximum threshold is exceeded.
Neutral Provision	A Flag is raised when the neutral conductor is undersized.
Equipment Overloaded	A Flag is raised when a piece of distribution Equipment is overloaded.
Equipment Voltage Drop Error	A Flag is raised when the VD% Net exceeds the threshold value.

Custom Design Assistance Settings

Property	Definition
Frame Size	Deselect Frame Size to omit the Frame Size from being recalculated upon changes to circuit properties.
Trip Size	Deselect Trip Size to omit the Trip Size from being recalculated upon changes to circuit properties.
kAIC Rating	Deselect kAIC Rating to omit the kAIC Rating from being recalculated upon changes to circuit properties.
Temperature Rating	Deselect Temperature Rating to omit the Temperature Rating from being recalculated upon changes to circuit properties.
Sets Per	Deselect Sets Per to omit the Sets Per or quantity of sets of conductors from being recalculated upon changes to circuit properties.
Phase Size	Deselect Phase Size to omit the Phase Size from being recalculated upon changes to circuit properties.
Neutral Size	Deselect Neutral Size to omit the Neutral Size from being recalculated upon changes to circuit properties.
Ground Size	Deselect Ground Size to omit the Ground Size from being recalculated upon changes to circuit properties.
Conduit Size	Deselect Conduit Size to omit the Conduit Size from being recalculated upon changes to circuit properties.

Architectural Elements

X Comp/Y Comp

X Comp and Y Comp are used to establish a location for Rooms. Equipment is placed inside Rooms, which are affected by point-to-point calculations.

Property	Data Type	Definition
Name	string	The name of the column.
Dimension	int	The distance from the origin.

Floor

Floors are used for power density calculations and to also contain Rooms.

Property	Data Type	Definition
Name	string	The name of the column.
Elevation	int	The distance from the origin.
Height	int	The distance from the elevation of the level below.
Space Type	SpaceType	The Floor’s SpaceType.
Left Bound	XGrid	The leftmost boundary of the Floor.
Right Bound	XGrid	The rightmost boundary of the Floor.
Top Bound	YGrid	The topmost boundary of the Floor.
Bottom Bound	YGrid	The bottommost boundary of the Floor.
Calc SqFt	int	The area of the Floor’s defined boundaries.
Manual SqFt	int	A custom value overriding the calculated area of the Floor.
Override SqFt	int	A boolean value to use the calculated area or the manually defined area for determining the load of the Floor.
Load	double	The total load or power density of the Floor determined by the SpaceType and the area of the Floor.

Space Type

Space Types are used to assign power densities to architectural entities such as Floors and Rooms.

For example, Engineers perform load massing calculations in order to size their main distribution equipment. They allocate power differently for floor loads, lighting loads and mechanical loads.

Space Types are customizable and a set of default load values are provided. A variety of Space Types allows the Engineer to study and explore the power density requirements of a project.

Property	Data Type	Definition
Name	string	The name of the Space Type.
Power	double	A factor used to allocate for floor loads.
Lighting	double	A factor used to allocate for lighting loads.
Mechanical	double	A factor used to allocate for mechanical loads.

Room

Rooms are used to establish locations for equipment. Based on these locations, Engineers can perform their point-to-point calculations. Rooms can also be packaged to create custom load packages.

Property	Data Type	Definition
Name	string	The name of the Room.
SqFt	int	The area of the Room.
Space Type	SpaceType	The SpaceType which is used to determine the load.
X Column	XComp	The location of the Room along the x-axis.
Y Column	YComp	The location of the Room along the y-axis.
Floor	Floor	The Floor location of the Room which provides a z-coordinate.
Load	double	The load determined by the area (SqFt) and the SpaceType.

Riser

A Riser is an entity used to offset conduit routes. By default, the length of a conduit route is determined by the distance between the source and the load. However, Engineers are often allocated Risers or shaft space to house their conduits or feeders. The conduits are routed from their source, through the Riser and terminate at the load.

Property	Data Type	Definition
Name	string	The name of the Riser.
X Column	XComp	The location of the Riser along the x-axis.
Y Column	YComp	The location of the Riser along the y-axis.
Top Bound	YGrid	The topmost boundary of the Riser.
Bottom Bound	YGrid	The bottommost boundary of the Riser.

Architectural Package

Architectural Packages are used to model the load or power density of a group of architectural elements.

Property	Data Type	Definition
Name	string	The name of the Riser.
NET PWR	double	The total load allocated for power determined by the total area and SpaceTypes.
NET LTG	double	The total load allocated for lighting determined by the total area and SpaceTypes.
NET MECH	double	The total load allocated for mechanical loads determined by the total area and SpaceTypes.
NET ALLOC.	double	The total load allocated from additional Load Allocations.
NET kVA	double	The total load determined by the sum of the NET PWR, NET LTG, NET MECH, and NET ALLOC.
DRAW @ 480V	double	The current drawn from the NET kVA at 480V.
DRAW @ 208V	double	The current drawn from the NET kVA at 208V.

Appliance

Appliances are used to calculate the load of residential projects and are grouped by classes as defined by the NEC. Appliances are assigned to a Unit Type.

Property	Data Type	Definition
Name	string	The name of the Appliance.
Class	int	The class of the Appliance as defined by the NEC.
Voltage	int	The voltage of the Appliance.
Poles	int	The number of hot conductors for the Appliance.
Draw	int	The load of the Appliance.

Unit Type

Unit Types are used to group Appliances together in order to calculate the load of residential projects. A Unit Type is assigned to an Apartment.

Property	Data Type	Definition
Name	string	The name of the Unit Type.
Small-Appl Load	double	The total load of all Appliances which are classified as Small Appliance.
Fixture Load	double	The total load of all Appliances which are classified as Fixture.
Range Load	double	The total load of all Appliances which are classified as Range.
Dryer Load	double	The total load of all Appliances which are classified as Dryer.
HVAC Load	double	The total load of all Appliances which are classified as HVAC.

Apartment

An Apartment is assigned a Unit Type. It also contains information regarding its location and loading information. A group of Apartments form an Apartment Package.

Property	Data Type	Definition
Name	string	The name of the Apartment.
Unit Type	double	The Unit Type of the Apartment.
SqFt	int	The area of the Apartment.
Voltage	int	The voltage of the Apartment.
Poles	int	The number of hot conductors for the Apartment.
X Column	XComp	The location of the Room along the x-axis.
Y Column	YComp	The location of the Room along the y-axis.
Floor	Floor	The Floor location of the Room which provides a z-coordinate.
Optional-Calc	double	A calculation method determined by the NEC for calculating residential loads.
Standard-Calc	double	A calculation method determined by the NEC for calculating residential loads.
Multi. Dwell-Calc	double	A calculation method determined by the NEC for calculating residential loads.

Apartment Package

Apartment Packages are used to group Apartments together to aggregate a load.

Property	Data Type	Definition
Name	string	The name of the Apartment Package.
Voltage	int	The voltage of the Apartment Package.
Poles	int	The number of hot conductors for the Apartment Package.
Optional-Calc	double	A calculation method determined by the NEC for calculating residential loads.
Standard-Calc	double	A calculation method determined by the NEC for calculating residential loads.
Multi. Dwell-Calc	double	A calculation method determined by the NEC for calculating residential loads.

Load Allocation

A Load Allocation is used to supplement Architectural Packages. A designer can gather design parameters in order to determine a load.

Property	Data Type	Definition
Name	string	The name of the Load Allocation.
Per Unit Size	int	The equipment size of each unit.
Unit Type	int	The load unit of each unit.
QTY	int	The quantity of units per Floor.
Per Floor	boolean	A boolean property which represents the load for each Floor, or based on a certain number of Floors.
Floor Space Type Filter	int	A filter which can be used to apply a load for a specific Space Type.
Net Load	double	The total load as determined by the total units for each applied Floor.

Diversification

Diversification allows the designer to create custom load diversities that can be applied to specific sections of the network.

Property	Data Type	Definition
Name	string	The name of the Custom Diversity Class.
Root Div.	double	The diversity factor applied to Root Level loads.
Dist. Div.	double	The diversity factor applied to Distribution Level loads.
EOL Div.	double	The diversity factor applied to End-of-Line Level loads.

Equipment Definitions

General Properties

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.

Load Properties

Property	Data Type	Definition
Equipment Type	string	Denotes the type of Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Power Type	string	Denotes either a source of distribution of power or a load.

Bus Structure Properties

Property	Data Type	Definition
MCB	boolean	Specifies a main circuit breaker.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Frame/Switch Size	int	Specifies the breaker frame size or switch size for the OCPD.
Trip/Fuse Size	int	Specifies the breaker trip size or fuse trip size for the OCPD.
kAIC Rating	string	Specifies the kAIC rating of the equipment.

Construction Properties

Property	Data Type	Definition
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Flush-Mount	boolean	Specifies a flush mounted construction.
Enclosure	int	Specifies the type of NEMA enclosure.

Accessories Properties

Property	Data Type	Definition
Voltmeter	boolean	Specifies a voltmeter as an accessory.
SPD	boolean	Specifies a surge protection device as an accessory.
Power Meter	boolean	Specifies a power meter as an accessory.

Load Readings Properties

Property	Data Type	Definition
Net Load	boolean	Specifies a voltmeter as an accessory.
Max Capacity	string	Denotes the maximum capacity determined by 80% of the Load Capacity. Available units are kVA, kW, and A.
Custom Diversity Class	Diversification Class	Denotes the diversity class to apply the corresponding demand factor.
Diversity Position	int	Denotes the level in the hierarchy of the distribution system to apply a corresponding demand factor.
Connected Load	double	Net customer diversified connected load + net elevator load.
Code Demand Load	double	Net custom diversified diversified load + net diversified elevator load + net diversified residential load.
Diversified Resi. Load	boolean	The total load of the residential equipment based on the NEC.
% Design Spare Capacity	double	An adjustment factor based on the Code Demand Load.
Net Design Spare Capacity	double	The Net Load multiplied by the % Design Spare Capacity Factor.
% Loaded	double	The Net Load divided by the Max Capacity.

Cable Properties

Property	Data Type	Definition
# Sets	int	Specifies the number of sets of the wire arrangement.
# Phase Legs	int	Specifies the number of hot conductors per raceway.
Phase Size	string	Specifies the size of the phase conductors.
# Neutrals	int	Specifies the number of neutral conductors per raceway. A neutral conductor is required for equipment with a neutral bus.
Neutral Size	string	Specifies the size of the neutral conductor(s) per raceway. A neutral conductor is required for equipment with a neutral bus.
# Grounds	int	Specifies the number of ground conductors per raceyway. A ground conductor is required for equipment with a ground bus.
Ground Size	string	Specifies the size of the ground conductor.
Insulation Type	int	Specifies insulation type for the wire arragement.
Conductor Material	int	Specifies the conductor material for the wire arrangement. The default conductor is copper.
Temperature Rating	int	Specifies the temperature rating of conductors.
Non-Linear	boolean	Specifies if a load is non-linear. Non-linear loads include, but are not limited to: UPS, VFD, Power Supplies, etc.

Conduit Properties

Property	Data Type	Definition
Raceway Type	string	Specifies the type of raceway used to cover the wire arrangement.
Raceway Size	string	Specifies the size of the raceway used to contain the wire arrangement.

Network Reading Properties

Property	Data Type	Definition
Riser	Riser	Specifies if a circuit is being routed through a Riser or risershaft.
Manual Added Length	int	Specifies a custom length which is supplemental to the Calc. Length.
Calc. Length.	int	The length determined by an orthogonal route between two Room locations.
Net Length	Net Length	The sum of the Calc. Length and Manual Added Length.
VD% Incoming	VD% Incoming	The percentage of total volts dropped at the upstream node in the distribution system.
VD% Run	VD% Run	The percentage of total volts dropped across the run.
VD% Net	VD% Net	The sum of VD% Incoming and VD% Run.
Net Amperage	double	The Net Load expressed in amps.
SCC Incoming	double	The available fault current at the upstream node in the distribution system.
SCC Net	double	The total available fault current.

Mechanical

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
VFD	boolean	Specifies a variable frequency drive for the motor.
# Motors	int	Represents the quantity of motors as part of the motor collection.

Distribution Board

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
MCB	boolean	Specifies a main circuit breaker.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Frame/Switch Size	int	Specifies the breaker frame size or switch size for the OCPD.
Trip/Fuse Size	int	Specifies the breaker trip size or fuse trip size for the OCPD.
kAIC Rating	string	Specifies the kAIC rating of the equipment.

XFMR

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
Secondary Voltage	int	The voltage across the secondary of the transformer.
Size	double	Specify the load size of the transformer.
Primary Winding	int	The primary winding configuration for a transformer.
Secondary Winding	int	The secondary winding configuration for a transformer.
Primary Voltage	int	The voltage applied to the terminals of the primary windings of a transformer.
Secondary Voltage	int	The voltage applied to the terminals of the secondary windings of a transformer.
Overload Rating	double	The overload rating of a transformer.
Percent Impedance	double	The voltage drop on full load due to winding resistance and leakage reactance as a percentage of the rated voltage.
K Rating	string	The index of a transformer’s ability to withstand harmonic content while operating within the temperature limits of its insulating system.
XFMR Type	int	Specifies the type of a transformer to be dry, cast coil, vacuum pressure impregnated (VPI), or liquid.
Temperature Rise	int	The average temperature rise that will occur in the coils during normal full load.
Grounding Type	int	The diversity class applied to a section of the distribution network.
Insulation Rating	int	The insulation class or rating for a transformer at its maximum temperature rating.
Primary BIL	int	The BIL (Basic Impulse Level) is a method expressing the voltage surge that a transformer will tolerate without breakdown.
Secondary BIL	int	The BIL (Basic Impulse Level) is a method expressing the voltage surge that a transformer will tolerate without breakdown.

Architectural Load

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Package	ICircuitablePackage	Select the group of Architectural entities which compose the Package

Fire Pump

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.

Panelboard

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
MCB	boolean	Specifies a main circuit breaker.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Bolt-On Breaker	boolean	Specifies a bolt-on breaker.
Flush-Mount	boolean	Specifies a flush mounted construction.
Enclosure	int	Specifies the type of NEMA enclosure.
Door-in-Door	boolean	Specifies a door-in-door construction vs. hinged trim
Stainless Steel	boolean	Specifies a stainless steel construction.
Feed-Through	boolean	Specifies a feed-through installation.
Voltmeter	boolean	Specifies a voltmeter as an accessory.
SPD	boolean	Specifies a surge protection device as an accessory.
Power Meter	boolean	Specifies a power meter as an accessory.
Branch Circuit Meter	boolean	Specifies a branch circuit meter as an accessory.
Split Bus Meter	boolean	Specifies a split bus meter as an accessory.

ATS/STS

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
Bypass Isolation	boolean	Specifying an ATS to be include a bypass isolation switch.
Neutral Construction	int	Specifies the ATS neutral construction to be solid, switched, or overlapping.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Static	boolean	Specifies a static transfer switch.
Flush-Mount	boolean	Specifies a flush mounted construction.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Enclosure	int	Specifies the type of NEMA enclosure.

Bus Duct

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
Conductor Type	int	Specify the default conductor material.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Flush-Mount	boolean	Specifies a flush mounted construction.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Enclosure	int	Specifies the type of NEMA enclosure.

Switch Board

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
Conductor Type	int	Specify the default conductor material.
Neutral Bus	boolean	A dedicated bus for neutral conductors.
200% Neutral Bus	boolean	An oversized neutral conductor to be 200% the size of the phase conductor.
Ground Bus	boolean	Specifies a dedicated ground bus.
Isolated Ground Bus	boolean	An isolated ground bus providing a separate ground path.
Flush-Mount	boolean	Specifies a flush mounted construction.
Top-Fed	boolean	Specify if the Equipment is constructed via top fed installation.
Voltmeter	boolean	Specifies a voltmeter as an accessory.
SPD	boolean	Specifies a surge protection device as an accessory.
Power Meter	boolean	Specifies a power meter as an accessory.

Generic Load

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.

Bus Node

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.

Elevator

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.
# Motors	int	Represents the quantity of motors as part of the motor collection.

Tap Node

Property	Data Type	Definition
Name	string	The name of the Equipment.
Room	Room	The Room location of the Equipment.
Priority	int	The priority of the Equipment (N, EO1, EO2, LS).
Is Existing	boolean	The name of the Equipment.
Is Future	boolean	The name of the Equipment.
Load Capacity	double	The max capacity this Equipment will supply.
Load Override	double	A custom value which ignores all downstream loads.
Voltage	int	The voltage of the Equipment.
Poles	int	The number of hot conductors for the Equipment.
Power Factor	double	The ratio of real power absorbed by the load to the apparent power flowing in the circuit.
Load Group	string	A custom name which a designer can use to group loads together.
Tags	string	A custom set of strings which can be used to group equipment or loads.